COSHH assessmentsBitumen & Hot Works
COSHH 2002

Bitumen & Hot Works COSHH assessment

Hot bitumen used in roofing and surfacing gives off fume and presents a serious burn risk. It is a hazard for roofers and surfacing gangs, particularly with torch-on and boiler work.

The hazards

  • Fume released when bitumen is heated
  • Severe burn risk from hot material and boilers
  • Fire risk from torches and hot works
  • Fume increases sharply if bitumen is overheated

Who is at risk

Roofers (torch-on and pour-and-roll)Surfacing and asphalt gangsBoiler operators

Exposure routes

  • Inhalation of fume
  • Skin contact (burns)
  • Eye contact

Health effects

  • Serious burns
  • Respiratory and eye irritation from fume
  • Headaches and nausea from heavy fume exposure

Control measures (hierarchy of control)

Controls should be applied in order — eliminate or substitute first, then engineering controls, then PPE as the last line.

  • Do not overheat — control the temperature to the minimum needed
  • Work upwind and position people away from the fume
  • Provide good ventilation; extra care in enclosed areas
  • Hot-works permit, fire watch and extinguishers for torch work
  • Safe handling and pouring procedures to prevent burns

PPE & RPE

  • Heat-resistant gloves and gauntlets
  • Long sleeves and appropriate footwear
  • Eye protection
  • RPE where fume cannot be controlled by position and ventilation

First aid

  • Burns: cool with running water, do not pull material off the skin, and get urgent medical help
  • Fume: move to fresh air
  • Log all burns and incidents

Workplace exposure limit (WEL)

There is no formal Workplace Exposure Limit for bitumen fume in the UK; HSE good practice is to keep exposure below a benchmark of around 5 mg/m³ and as low as reasonably practicable by controlling temperature and position.

Relevant legislation & guidance

Control of Substances Hazardous to Health Regulations 2002Regulatory Reform (Fire Safety) Order 2005HSE guidance on bitumen

Bitumen & Hot Works COSHH FAQs

Do I need a COSHH assessment for hot bitumen?

Yes — heating bitumen produces fume that is hazardous to health, and the work also carries a serious burn and fire risk. A COSHH assessment covers the fume controls, and a hot-works permit covers the fire risk.

How do I reduce bitumen fume?

Keep the temperature to the minimum needed and never overheat, work upwind and position people away from the plume, ventilate enclosed areas, and use RPE where fume cannot otherwise be controlled.

Don't copy a generic template — generate the right one

Complys writes a bitumen & hot works COSHH assessment tailored to how you actually use it, in minutes — COSHH 2002 compliant, editable, with review-date tracking. Your first is free.